180 mm angle grinder cowl for dust-free grinding and sanding - buy online. Moulded polyurethane with detachable 38/50 mm hose connector. Fitted with aluminium clamp for selected 180 and 230 mm grinders - see compatability chart below. For use with 180 mm diamond cup disks or flat sanding pads (with Flexipad Adapter/Spacer). Replacement polyurethane shroud available. Full details below ...
Warning: Last items in stock!
G-Tec grinding cowls attach to angle grinders using an aluminium clamp, machined to be an exact fit for specific models. This is very important as the rubbing action of the polyurethane shroud on rough or uneven surfaces could easily unseat a poorly attached cowl. The moulded polyurethane shroud is flexible in construction, thereby accomodating reducing height of the grinding disk (through wear) and the uneven nature of many surfaces. Moreover, when the shroud has worn away, the aluminium clamping boss can be unscrewed and a replacement shroud can be fitted.
G-Tec cowls are supplied with custom flange nuts which position a standard format diamond grinding disk optimally within the shroud. These flange nuts are supplied in appropriate sizes for both 125mm and 180mm grinders. By exception, Hitachi 180mm cowls are configured to use the manufacturer supplied flange nuts and hence are a less expensive item.
All G-Tec cowls are supplied with a detachable polyurethane hose cuff. This cuff permits use of either 50mm or 38mm diameter vacuum hose. It ensures maximum vacuum effect is retained by sealing closely with the shroud. It also stops the hose end fraying or losing shape and permits its easy removal and replacement.
The G-Tec hose outlet is parallel to the grinding surface and in line with the natural draft created by the rotating disk, thereby maximising the dust extraction potential.
An SV50 dust extractor is suitable for use with an angle grinder fitted with a 180 mm G-Tec dust cowl and a diamond 'cup' disk or flat sanding disk (in conjunction with our Flexipad Adapter (spacer kit)
Updated Design - M Class updates plus new hose, fittings and combined Lifting Handle/Scaffold Hook. 1400 watt, single motor, cyclonic-action Dust Extractor with on-board filter cleaner, bagged waste collection and 5 metre hose range. For dry materials. Available as 110V and 240V. More details below ...
Tuff Key 4-pin flange nut spanner available to buy online. Provides more secure connection and reach than standard issue flat angle grinder spanners. Ideal for securing depressed centre diamond cup disks and for use with C-Tec Cutting and G-Tec Grinding cowls. Suitable for use with standard angle grinder flange nuts as well as custom flange nut sets provided with Sunrise Tools products.
|Makita||9049, 9067, 9069, GA7020, GA9020|
If your grinder is not listed but you think it might be compatible, please call us on: 01794 830 841 and we will do our best to advise you.