Menu

G-Tec All-fit

The G-Tec All-fit is a universal-fit angle grinder dust control cowl, for use with 180 mm grinding and sanding disks. It can be purchased on-line, with or without the hinged flip front feature, which allows unobstructed edge grinding. It is suitable for use with most 180 and 230 mm angle grinders from Bosch, De Walt, Hitachi, Makita, Metabo and Milwaukee. It should also fit selected 230 mm Hilti angle grinders. As standard, it is configured for use with depressed centre diamond 'cup' grinding disks, but with the addition of our Flexipad adapter, it will be suitable for use with flat format disks, or sanding sheets support by a flat backing pad.

G-Tec Allfit Grinding & Sanding Cowl

G-Tec Allfit Grinding & Sanding Cowl

£79.00 excl. VAT £94.80 incl. VAT

Multi-fit dust-free or dustless grinding and sanding cowl for Bosch, Hitachi, Makita, Metabo, DeWalt and Milwaukee 180 & 230 mm angle grinders - buy online. For use with 180 mm diamond 'cup' disks. 50 mm dust extractor or vacuum port for direct connection of 50 mm diameter extractor hose; if using 38 mm hose, add the G-Tec Hose Cuff, which can be found under the Accessories/Related tab, below. 

find out more
G-Tec Allfit Grinding & Sanding Cowl with Flip-front

G-Tec Allfit Flip Front Grinding & Sanding Cowl

£92.00 excl. VAT £110.40 incl. VAT

Multi-fit dust-free grinding and sanding cowl, with hinged 'Flip Front' for Bosch, Hitachi, Makita, Metabo, DeWalt and Milwaukee 180 & 230 mm angle grinders - buy online. For use with 180 mm diamond 'cup' disks. 50 mm dust extractor or vacuum port; if using 38 mm hose, add the G-Tec Hose Cuff, which can be found under the Accessories/Related tab, below. 

find out more
180mm Turbo Grinding Disk

180 mm Turbo Diamond Grinding Disk

£64.90 excl. VAT £77.88 incl. VAT

24 segment general purpose diamond grinding turbo 'cup' disk with double-height (10 mm) diamond segments, available to buy online. Widely used for smoothing concrete, reducing screed levels in small areas, removing coatings and other surface preparation work. 

Tuff Key Flange Nut Spanner

Tuff Key Flange Nut Spanner

£16.96 excl. VAT £20.35 incl. VAT

Tuff Key 4-pin flange nut spanner available to buy online. Provides more secure connection and reach than standard issue flat angle grinder spanners. Ideal for securing depressed centre diamond cup disks and for use with C-Tec Cutting and G-Tec Grinding cowls. Suitable for use with standard angle grinder flange nuts as well as custom flange nut sets provided with Sunrise Tools products.

find out more
Flexi-pad Adaptor

Flexi-pad Adapter

£14.30 excl. VAT £17.16 incl. VAT

M14 threaded angle grinder spindle adapter or extender for use with flat backing pads and disks

find out more

EZe Grip Angle Grinder Handle

£11.99 excl. VAT £14.39 incl. VAT

EZe Grip is an improved Angle Grinder control handle for selected 230 mm (9 inch) angle grinders. It is particularly suited to grinding and sanding applications, allowing the user to exert greater pressure on the grinder head without the risk of reducing airflow to the motor. Use the drop-down selector to check availability for your grinder. More details below …