Menu

Diamond Blades

We offer a range of diamond cutting, raking and chasing blades, in sizes ranging for 115 mm to 230 mm, for use in mortar or concretes; in the case of mortar raking blades, these are available in three widths. We also have metal cutting blades for use with the Sparkbuster safety guard.

95 mm Mortar Raking Blade

£45.75 excl. VAT £54.90 incl. VAT

95 mm diameter, 6 mm wide, Diamond Mortar Raking blade, with standard 22 mm bore, primarily for use on the brick perps (vertical joints). As consequence of reduced blade diameter, cutting depth significantly reduced - see More Info below for guidance on blade capacity on typical equipment configurations.

find out more

125 mm Economy Diamond Mortar Raking Blade

£23.85 excl. VAT £28.62 incl. VAT

Economy Diamond Mortar Raking blade, constructed from two narrow diamond blades. Likely to require less input power and may cut faster than equivalent width solid blade. But may result in thin centre 'slice' of mortar needing to be chipped out after raking.
125 mm overall diameter; blade widths - 6, 8 and 10 mm (using combinations of 2 and 3 blades)
Standard 22 mm blade bore
Select required width from the Blade Size drop-down menu.

125 mm Diamond Mortar Raking Blade

£49.76 excl. VAT £59.71 incl. VAT

Diamond Mortar Raking blade - 125 mm diameter; 3 mm core width; 22 mm bore; 12 mm segment depth. Blade/segment widths - 6, 8, 10 & 12 mm.
Select required width from the Blade Size drop-down menu.

125mm Mortar Raking Blades

125 mm Premium Diamond Mortar Raking Blade

£56.56 excl. VAT £67.87 incl. VAT

Premium quality 125 mm Diamond Mortar Raking blade of European manufacture. 6, 8 & 10 mm widths, all with 10 mm tall diamond segments. Available ex stock to buy online. Select required width from the Blade Size drop-down menu above the Add to Cart button

Tuff Key Flange Nut Spanner

Tuff Key Flange Nut Spanner

£16.96 excl. VAT £20.35 incl. VAT

Tuff Key 4-pin flange nut spanner available to buy online. Provides more secure connection and reach than standard issue flat angle grinder spanners. Ideal for securing depressed centre diamond cup disks and for use with C-Tec Cutting and G-Tec Grinding cowls. Suitable for use with standard angle grinder flange nuts as well as custom flange nut sets provided with Sunrise Tools products.

find out more
C-Tec Blade Spacer Kit

Blade Spacer Kit

£24.75 excl. VAT £29.70 incl. VAT

Multi-Blade Spacer Kit for dust-free channel cutting using 180mm & 230mm C-Tec Cutting Cowls.

find out more