Multi-purpose surface preparation, maintenance and cleaning machine. Single phase electrics. Low rotation speed. Best used with silicon carbide or tungsten ‘chip’ sanding disks. Sometimes used with bolt-on diamond segments for smoothing newly-laid screeds.
125 mm Hitachi angle grinder (1040 watt - 110 or 240 volt) with G-Tec dust-free grinding and sanding cowl, turbo diamond grinding disk and service tools - buy online. G-Tec cowl comprises moulded polyurethane shroud (replaceable) and 38/50 mm hose connector. Configured for diamond cup disks. With our Flexipad Adapter, may be suitable for flat sanding disks and pads. More details below.
Highly portable single-head grinder, equipped with 2 HP electric motor and a 230 mm diamond carrier/drive plate. Suitable for use in confined spaces. Single-phase electrics, 110 V or 240 V. Used for general surface preparation and maintenance tasks.
Hitachi angle grinder fitted with G-Tec dust-free grinding and sanding cowl and 180 mm turbo diamond grinding cup disk; Tuff Key flange spanner included - buy online. Grinder in 110 or 240 volt, 2000 or 2300 watt. G-Tec cowl accepts 38 and 50 mm extractor hose; polyurethane shroud can be replaced when worn. With our Flexipad Adapter, suitable for flat sanding disks. More details below ...
Brush-edged dust control shroud with dual extraction points, combined to present a single 38 mm outlet port for connection of vacuum source. This item fits loosely over the FTR floor assembly but will not detach when the machine is raised off the floor.