Multi-fit dust-free grinding and sanding cowl, with hinged 'Flip Front' for Bosch, Hitachi, Makita, Metabo, DeWalt and Milwaukee 180 & 230 mm angle grinders - buy online. For use with 180 mm diamond 'cup' disks. 50 mm dust extractor or vacuum port; if using 38 mm hose, add the G-Tec Hose Cuff, which can be found under the Accessories/Related tab, below.
Warning: Last items in stock!
What's included: G-Tec Allfit Flip Front Cowl with custom flange nut set, to suit 180 mm depressed centre diamond 'cup' disk (grinding disk NOT included)
The G-Tec Allfit Flip Front Cowl will fit on most 230mm grinders from Bosch, DeWalt, Hitachi, Makita, Metabo and Milwaukee. This polyurethane grinding cowl has an integrated reinforcing band which improves rigidity and minimises wear rate and a hinged front section, which permits the grinding disk to work up to edges and upstands, with little loss of performance. G-Tec Allfits have a 50 mm dust outlet, aligned with the airstream generated by the rotating disk, thereby providing maximum dust extraction. It's quick and easy to install - no tools are necessary - and if your grinder fails, undo the securing clamp, remove the cowl and fit to a new grinder, changing the fitting ring if necessary.
50 mm extractor hose connects directly to the G-Tec Allfit dust outlet; if using 38 mm hose, add the G-Tec Hose Cuff, which can be found under the Accessories/Related tab, above.
An SV50 dust extractor is suitable for use with a grinder fitted with a G-Tec Allfit and a diamond 'cup' disk
Updated Design - M Class updates plus new hose, fittings and combined Lifting Handle/Scaffold Hook. 1400 watt, single motor, cyclonic-action Dust Extractor with on-board filter cleaner, bagged waste collection and 5 metre hose range. For dry materials. Available as 110V and 240V. More details below ...
Tuff Key 4-pin flange nut spanner available to buy online. Provides more secure connection and reach than standard issue flat angle grinder spanners. Ideal for securing depressed centre diamond cup disks and for use with C-Tec Cutting and G-Tec Grinding cowls. Suitable for use with standard angle grinder flange nuts as well as custom flange nut sets provided with Sunrise Tools products.