Termite Mortar Raking - Starter Kit

These European-manufactured tungsten carbide mortar rakes fit directly to the M14 spindle on 115 and 125 mm angle grinders. This item is 26 mm long. Various combinations of diameter (6, 8, 10 or 12 mm) and cutter count (3, 4 or 6) are available - check availability using drop-down selector alongside. See advice on care and use below including cautionary note on use of 6 mm rakes ...

60 mm long three cutter tungsten carbide rakes for deep mortar joints. Available in 8, 10 and 12 mm diameter. M14 internal thread for fitment to 115 and 125 mm angle grinders. See advice on use below …

22 mm diameter, in 26 and 60 mm lengths, the Termite Wall Chaser Rake, for angle grinders with M14 spindles, is suitable for use in aerated concrete - it is NOT suitable for use in traditional brick, block or concrete structures. Constructed with 6 tungsten carbide cutting strips, it is generally used for creating channels for cabling, plumbing and similar service inserts. For both depth and dust control, it is best used with the Termite Grinder Attachment - more details below.

120 mm overall length tungsten carbide mortar rake in 8 and 10 mm diameters, with three 60 mm long cutting edges.
M14 internal thread for fitment to 115 and 125 mm angle grinders.
The extended length allows the 60 mm cutting edges to reach into awkward places, with the knowledge that the plain extension rod will do little damage to the surrounding structure.

For full brick removal, we recommend using the Termite XXD self-drilling mortar rake.

This item is 35 mm long. Available in 8, 10 and 12 mm diameters - 3 cutters only. These European-manufactured tungsten carbide mortar rakes fit directly to the M14 spindle on 115 and 125 mm angle grinders.  See advice on care and use below ...