zoom_in
92600008
120 mm overall length tungsten carbide mortar rake in 8 and 10 mm diameters, with three 60 mm long cutting edges.
M14 internal thread for fitment to 115 and 125 mm angle grinders.
Suitable for removal of complete bricks BUT MUST BE USED WITH CARE - see further advice on use below …
100% secure payments
Superior design Mortar Raking attachment for small angle grinders combining dust and depth control functions. Long-life stainless steel base-plate with sighting guides. 'Always open' extraction port with ‘keyhole’ extension for enhanced dust control. Supplied with five colour-coded spacer rings, matched to popular brands of 115 and 125 mm grinders. See detailed information below …
Superior design Mortar Raking Starter Kit for small angle grinders complete with two mortar rakes. Raking attachment combines dust and depth control functions with 'always open' extraction port and 'keyhole' extension for enhanced joint cleaning. Long life stainless steel base-plate with beveled edges and sighting guides. Supplied with five colour-coded spacer rings, matched to popular brands of 115 and 125 mm angle grinders. See detailed information below ….
These European-manufactured tungsten carbide mortar rakes fit directly to the M14 spindle on 115 and 125 mm angle grinders. This item is 26 mm long. Various combinations of diameter (6, 8, 10 or 12 mm) and cutter count (3, 4 or 6) are available - check availability using drop-down selector alongside. See advice on care and use below including cautionary note on use of 6 mm rakes ...
60 mm long three cutter tungsten carbide rakes for deep mortar joints. Available in 8, 10 and 12 mm diameter. M14 internal thread for fitment to 115 and 125 mm angle grinders. See advice on use below …
