Concrete Surface Preparation Tools

Unique on-axis core drilling system with guaranteed core retention for holes from 75 to 200 mm (3" to 8") up to 300 mm (12") deep. System secured by a SINGLE anchor drilled into the CENTRE of the cored area, sparing the surrounding areas of damage. Uses widely available Golz 3 bolt pattern core bits. Permits horizontal, vertical and angled drilling in situations inaccessible to traditional pillar rigs.

More information in video and tabs below ...

Please call or email for stock availability

Tapered mixer drill paddle - 120 mm M14 threaded mixing paddle for viscous materials

Multi-purpose surface preparation, maintenance and cleaning machine. Single phase electrics. Low rotation speed. Best used with silicon carbide or tungsten ‘chip’ sanding disks. Sometimes used with bolt-on diamond segments for smoothing newly-laid screeds.

This accessories supports the Guide Bar at the chosen working angle. Please note it is not an angle drilling guide - the user drills and inserts the anchor in the concrete prior to the introduction of this device.

Tapered mixer drill paddle - 140 mm M14 threaded mixing paddle for viscous materials

80 litre compact transportable forced action pan mixer for general mortars, screeds, resin mixes and much more.

Highly portable single-head grinder, equipped with 2 HP electric motor and a 230 mm diamond carrier/drive plate. Suitable for use in confined spaces. Single-phase electrics, 110 V or 240 V. Used for general surface preparation and maintenance tasks.

125 mm Hitachi angle grinder (1040 watt - 110 or 240 volt) with G-Tec dust-free grinding and sanding cowl, turbo diamond grinding disk and service tools - buy online. G-Tec cowl comprises moulded polyurethane shroud (replaceable) and 38/50 mm hose connector. Configured for diamond cup disks. With our Flexipad Adapter, may be suitable for flat sanding disks and pads. More details below.

The Hex Drive Adapter connects the power source to the core drill. It is secured to the core drill by 3 x low profile M10 socket screws. It is commonplace for an operator to have a Hex Drive pre-fitted to more than one core bit so that time can be saved when swapping to larger holes.

Tapered mixer drill paddle - 120 mm M14 threaded mixing paddle for heavy viscous materials

100 litre compact transportable forced action pan mixer for general mortars, screeds, resin mixes and much more.

Heavy duty single-head diamond grinder, 110 volt or 3 phase, for high productivity surface preparation