230 mm Cutting and Chasing Dust Control Cowl for popular angle grinders using single 180 or 230 mm Diamond Cutting Blades. Positive depth control in 5 mm steps to maximum 60 mm (230 mm blade). Sight guide and stabilizing frame (with rollers) for smooth and accurate cutting. For further detail, see More Info and Which Grinders Will Fit below 

Prices lowered - the ULTRALIGHT SAFETY 1^st is a revolutionary Wellington Boot, moulded from EVA polymer, with a Steel Toe Cap, an Anti-perforation KELVAR Mid-sole and a Removable/Washable sock-liner. A single boot weighs less than 900 grams - half the weight of most steel toe-capped wellingtons. Long and short styles - see below for sizes and our returns policy. For assistance, call 01794 830 841.

60 mm long three cutter tungsten carbide rakes for deep mortar joints. Available in 8, 10 and 12 mm diameter. M14 internal thread for fitment to 115 and 125 mm angle grinders. See advice on use below …

These European-manufactured tungsten carbide mortar rakes fit directly to the M14 spindle on 115 and 125 mm angle grinders. Various combinations of diameter (6, 8, 10 or 12 mm) length (26 or 60 mm) and cutter count (3, 4 or 6) - check availability using drop-down selector alongside. See advice on use below ...

Mortar Raking equipment set containing Termite Mortar Rake attachment fitted to 125 mm Makita angle grinder, along with 8 and 10 mm diameter Termite mortar rakes and service tools. All contained in a lockable toolbox. Choose 110 or 240 volt in drop-down menu. See below for contents list …

Superior design Mortar Raking Starter Kit for small angle grinders complete with two mortar rakes. Raking attachment combines dust and depth control functions with 'always open' extraction port and 'keyhole' extension for enhanced joint cleaning. Long life stainless steel base-plate with bevelled edges and sighting guides.  Spacer rings for selected angle grinders included. More details below ….

Superior design Mortar Raking attachment for small angle grinders combining dust and depth control functions. Long-life stainless steel base-plate with sighting guides. 'Always open' extraction port with ‘keyhole’ extension for enhanced dust control. Supplied with five spacer rings to accommodate popular 115 and 125 mm grinders. See below for more info …

1/2 metre x 32 mm wire-reinforced connector hose fitted with 32 mm polyurethane cuffs. See below for more details of uses

5 metre x 38 mm diameter wire-reinforced hose assembly with custom hose cuffs for SV50 Dust Extractor and associated dust control attachments.

Fully assembled cutting, chasing or raking system, comprising Cyclone Dust cowl, Makita 125 mm angle grinder and 125 mm diamond blade (if requested). Connect to suitable dust extraction equipment for dust free operation. Select voltage and blade width using the drop-down menus - the default combination is 240 volt with NO BLADE fitted.  More details below ...

5 mm T-handle Hex or Allen Key suitable for use with C-Tec and G-Tec dust control products from Sunrise Tools

Dust Extraction Funnel for use with current AS170 models and earlier AS160 models. Effectiveness will be influenced by type of blade fitted and depth of cut being undertaken