Industrial specification twin motor cyclone dust extractor / dust collector, 110 or 240 volt, for dry materials. Heavy duty steel chassis with 65 litre wheel-away waste bin. Fitted with Teflon-coated 'star' filter (with filter shaker) and Class M cartridge filter. Supplied with 5 metre x 50 mm heavy duty hose. Detailed specification below.
Warning: Last items in stock!
The SV121 Cyclone Dust Extractor / Dust Collector is of robust design and suitable for industrial and construction site use.
General Construction - the stainless steel central section is permanently secured to the heavy duty steel chassis. A twin motor head is clamped on the top. A removable waste bin is raised and locked to its underside by a robust mechanism. The substantial steel chassis has two fixed rear wheels and two lockable front castors.
Filtration - first stage filtration is through a Teflon-coated 'star' filter. This item is protected by a shaped metal shield, which enhances cyclonic airflow, thereby delivering a high level of pre-separation. This results in less waste making direct contact with the filter, hence greater operating efficiency and extended periods between filter cleaning.
Second stage 'fine' filtration takes place at the 'M' Class cartridge filter attached to the underside of the vacuum motors.
A HEPA specification cartridge filter can be fitted in place of the 'M' Class item, should greater filtration of the exhausted air be required.
Waste Collection - waste products are drawn into the SV121 through a 50 mm diameter hose attached to a tangential inlet port. The waste ultimately finds its way to the 65 litre stainless steel storage bin which forms the lower section of the machine. A hand-operated bar unlocks and lowers the waste bin, which is fitted with 3 castor wheels for ease of movement. Refitting the waste bin is a simple reversal of the process, requiring negligible physical effort to raise and lock it in place.
Electrical - the twin motors in the head assembly are individually switched. The head assembly is supplied as either 110 or 240 volt - were it necessary to operate on a different supply voltage, the motor head can simply be unclipped and the alternative item fitted.
On-site, SV121 is commonly used with single-head diamond floor grinders up to 300 mm diameter, scabblers/planers up to 200 mm width and for dust-free cutting, chasing and grinding operations using angle grinders with suitable dust cowls. It is also suitable for dust-free operation of small pedestrian-controlled floor saws.
The SV121 Cyclone Dust Extractor / Dust Collector can be used in static applications such as workshops.
Please contact us if you require further information on this product and its uses.
As the unit is shipped on a pallet, you will need to contact us for the shipping cost to your location
|Filter||Teflon-coated 'star' and secondary 'M' Class cartridge filters|
|Storage capacity||65 litre|
|Hose||5 metre x 50 mm diameter, nylon-reinforced|
|Filter Cleaning||Manual, using external handle|
|Power||2 x 1200 watt motor, individually switched|