
Suretwist Helical Crack Stitch Bar
91ARHB10P
Grade 304 Stainless 6 mm diameter Helical Bar for crack stitching, offered in packs of 10 or 20 one metre lengths and as a single ten metre coil. Use drop-down menu alongside to select item required.
91ARHB10P
Grade 304 Stainless 6 mm diameter Helical Bar for crack stitching, offered in packs of 10 or 20 one metre lengths and as a single ten metre coil. Use drop-down menu alongside to select item required.
C-Tec Cutting and Chasing Dust Control Cowl for selected Bosch, Hitachi and Makita 180/230 mm angle grinders - see "Which Grinders Will Fit" tab below. Full length wrap-around stainless base plate, with depth setting facility. Supplied with custom flange nuts for correct blade placement. Take care to select correct product using the drop-down menu alongside. If unsure, contact us for advice.
Updated (mid 2019) Arbortech AS175 low dust reciprocal action saw, for chasing, plunge cutting and restoration works. Delivered in a custom holdall with General Purpose and Mortar Plunge blade pairs. Available to buy online - select 110 volt or 240 volt from drop-down menu below.
See More Info below for fuller specification ...
C-Tec 230 mm dust-free cutting cowl fitted to Hitachi grinder. Diamond blade and Tuff Key flange spanner included.
Two-part cementitious grout, supplied as a dry powder with a bottled liquid reactant. Mixed volume is approximately 3 litres.
Surebond polyester resin anchor grout suitable for use in brickwork, stone or concrete, for embedding helical bars, wall ties, starter bars and studs. Offered in packs of 4 or 12 x 400 ml tubes (with mixer nozzles) - use drop-down selector to indicate requirements.