Termite Mortar Raking for Brickwork and Stonework

Ready-to-work boxed kit for high intensity brick raking. Contains angle grinder fitted with dust extraction cowl and diamond raking blade, for dust-free raking of bed joints. Plus a second grinder fitted with the Termite dust-control attachment and associated mortar rake for safe full-depth raking of the perps. All housed in a single lockable toolbox* with essential PPE. Select 110 or 240 volt from drop-down menu.

*Substitute toolbox details below

See more info below for further details

Mortar Raking equipment set containing Termite Mortar Rake attachment fitted to 125 mm Makita angle grinder, along with 8 and 10 mm diameter Termite mortar rakes and service tools. All contained in a lockable toolbox. Choose 110 or 240 volt in drop-down menu. See below for contents list …

120 mm tungsten carbide mortar rake with tungsten carbide drilling tip.
10 mm diameter only.
Has four full length tungsten carbide cutting edges.
M14 internal thread for fitment to 115 and 125 mm angle grinders.
Suitable for removal of complete bricks BUT MUST BE USED WITH CARE - see further advice on use below …

Superior design Mortar Raking Starter Kit for small angle grinders complete with two mortar rakes. Raking attachment combines dust and depth control functions with 'always open' extraction port and 'keyhole' extension for enhanced joint cleaning. Long life stainless steel base-plate with beveled edges and sighting guides.  Supplied with five colour-coded spacer rings, matched to popular brands of 115 and 125 mm angle grinders. See detailed information below ….

120 mm overall length tungsten carbide mortar rake in 8 and 10 mm diameters, with three 60 mm long cutting edges.
M14 internal thread for fitment to 115 and 125 mm angle grinders.
The extended length allows the 60 mm cutting edges to reach into awkward places, with the knowledge that the plain extension rod will do little damage to the surrounding structure.

For full brick removal, we recommend using the Termite XXD self-drilling mortar rake.

Superior design Mortar Raking attachment for small angle grinders combining dust and depth control functions. Long-life stainless steel base-plate with sighting guides. 'Always open' extraction port with ‘keyhole’ extension for enhanced dust control. Supplied with five colour-coded spacer rings, matched to popular brands of 115 and 125 mm grinders. See detailed information below …

60 mm long three cutter tungsten carbide rakes for deep mortar joints. Available in 8, 10 and 12 mm diameter. M14 internal thread for fitment to 115 and 125 mm angle grinders. See advice on use below …

Forged steel chisel with copper-brazed carbide tips permitting mortar removal behind pipes, into corners, around windows etc - the areas a blade or routing bit (rake) will never reach. Has cranked SDS Plus shank for improved access - must be used with drill in hammer mode.

22 mm diameter, in 26 and 60 mm lengths, the Termite Wall Chaser Rake, for angle grinders with M14 spindles, is suitable for use in aerated concrete - it is NOT suitable for use in traditional brick, block or concrete structures. Constructed with 6 tungsten carbide cutting strips, it is generally used for creating channels for cabling, plumbing and similar service inserts. For both depth and dust control, it is best used with the Termite Grinder Attachment - more details below.

This item is 47 mm long. Available in 8 and 10 mm diameters - 3 cutters only. These European-manufactured tungsten carbide mortar rakes fit directly to the M14 spindle on 115 and 125 mm angle grinders.  See advice on care and use below ...

This item is 35 mm long. Available in 8, 10 and 12 mm diameters - 3 cutters only. These European-manufactured tungsten carbide mortar rakes fit directly to the M14 spindle on 115 and 125 mm angle grinders.  See advice on care and use below ...

These European-manufactured tungsten carbide mortar rakes fit directly to the M14 spindle on 115 and 125 mm angle grinders. This item is 26 mm long. Various combinations of diameter (6, 8, 10 or 12 mm) and cutter count (3, 4 or 6) are available - check availability using drop-down selector alongside. See advice on care and use below including cautionary note on use of 6 mm rakes ...